DELEMA RUST FLOORS FRAME 69 CHARGER

CANDAIAN CAR FROM ONTARIO

OWNED SINCE 2002, MY BUDDY OWNED SINCE 1980

PAID 7500 CDN FOR IT IN 2002, 383 AUTO FLOOR SHIFT( ORIGINAL 318 CAR)

OVER THE YEARS PUT MOSER 60 REAR END, THEN TKO 600 5 SPD THEN IN 2009 528 MOPAR/RAY BARTON HEMI

FRAME IN BACK WAS BAD WHEN I BOUGHT NOW REALLY BAD

FRAMES RAILS, TRUCK FLOOR EXTENSIONS ETC, TORSION CROSS MEMBER ROTTEN NEAR INNER ROCKERS, YEARS AGOSURE INNER AND OUTER WHEEL HOUSES. QUATRES ARE GOOD. WERE REPLACE

I HAVE 30K IN POWER TRAIN ALONE NOT INCLUDING ORIGINAL PURCHASE PRICE

NOT SURE IF WORTH FIXING ? WHAT AM I LOOKING AT ?

10, 20 30 k ? NOT LOOKIN FOR SHOW CAR FINISHES UNDERNEATH I RELIZE ONCE YOU GET CUTTING WHERE DO YOU STOP ?

IF I PUT 20 K IN IS THE CAR WORYTH 50 K ?

NOT A RICH GUY SO WOLD HAVE TO GO ON LINE OF CREDIT

PLEASE GIVE ME YOUR OPINIONS GOOD OR BAD

ALWAYS HOPPED ACORN WOULD BRING OUT A NEW BODY LIKE THEY DID FOR FOR AND CHEVY

OPTIONS DONOR CAR POSSIBLY ?

THANKS WERNER

Fix it, 2nd gen Charger with a Hemi will bring good money, I have had serious offers for my 68 Charger with a 512 wedge 50k US,& it is just a good driver,Fix what you have & you will KNOW what you have.

Get an accurate estimate of what it would cost to fix what you have.
From what you say, I'm guessing it would be cheaper to get a donor car.
There are many projects out there that people have gotten in over their head and can be had at a good price.

A good doner car will cost 30k probably a lot more LOL

Fix it. It will cost you less than a shell, if you can find one. I've replaced my frame rails with used and a new trunk floor. Lots of guys are doing it themselves at dodgecharger.com. My rails were mostly rotton in the rest half.

If you can do that kind of work, all the parts are available.
I see AMD advertise a lot.
Wish I had those skills.
My 68 Coronet 500 needs the same.
Just me, I'd never borrow money for a toy.

Do You have the ability and equipment to do it yourself, or are willing to acquire whatever you need to do it yourself?

You could buy the parts you need from AMD and have a great learning experience.

You could do a rear subframe (think drag car style back 1/2) and replace the rusty sheet metal with new flat sheet metal. Probably a lot cheaper then buying the AMD parts.

You could buy someones stalled project for pennies on the dollar, all you would need to do is find that guy and his car.

If you have to pay someone else to do the job, it will be expensive. I've heard AMD also installs panels...

I also have a hard time borrowing money for a toy, but I guess people do it all the time. Gene

NOT SURE THAT I UNDERSTAND....MAYBE YOU CAN TYPE BIGGER/LOUDER.