Distributor adapter to run 440 dist in 400 block?

Can't seem to find these anywhere anymore.Anybody have a source

Thanks,
George

http://www.cuda-challenger.com/cc/index.php?topic=83336.0

they don't make them anymore, but here are the plans.

You can cut down the shaft. this will let you set the shaft tang/intergear slot interface dead on (no rotational slop) for no spark scatter when setting the initial at idle.

http://www.manciniracing.com/rbtobbldiad.html

Dennis

Thanks guys!

Thanks for the offers and info.Had a friend bugging me to death for one.Turns out it is for a MSD distributor so I told him to buy one from Mancini for the MSD distributor.
Thanks again.

I had the same problem. I contacted MSD and bought the replacement shaft and just changed it. It's pretty easy to do.