Posted By: RAH
will floor interchange - 09/01/18 12:01 AM
Will the front floor sheet metal from a 1968 plymouth 4 door sedan b body fit a 2 door 1968 plymouth 2 door b body?metal floor needed to replace rusted floor in 2 door plymouth.
will floor interchange
Posted By: Alaskan_TA
Re: will floor interchange - 09/01/18 12:06 AM
Why not use the rusty 2 door as a parts car for the more solid 4-door?
Posted By: moparmarks
Re: will floor interchange - 09/01/18 01:06 AM
To answer your question, yes.
Posted By: bbtrux
Re: will floor interchange - 09/02/18 05:32 PM
I think Id drive or sell my clean 4 door and buy an amd floor for the two door.
Posted By: moparmarks
Re: will floor interchange - 09/02/18 06:10 PM
He never said the 4-dr was nice, clean and solid. Just has a good floor. A lot more to a car than just a floor. Might just be a shell with no title or drive train.
Posted By: Twostick
Re: will floor interchange - 09/03/18 06:33 PM
I'm thinking after he strips 2 cars down and drills all the spot welds out to remove 2 floor pans, $500 for a new AMD full front pan will seem cheap in retrospect.
Kevin
Kevin
Posted By: moparmarks
Re: will floor interchange - 09/03/18 08:14 PM
Not really. With the AMD pan you still have to drill 150 holes to plug weld it in.
Posted By: cudaman1969
Re: will floor interchange - 09/03/18 11:40 PM
Originally Posted By moparmarks
Not really. With the AMD pan you still have to drill 150 holes to plug weld it in.
Why drill holes?
Posted By: Morty426
Re: will floor interchange - 09/04/18 12:55 AM
Originally Posted By cudaman1969
Originally Posted By moparmarks
Not really. With the AMD pan you still have to drill 150 holes to plug weld it in.
Why drill holes?
When you have a spot welder