Moparts
Drive shaft length for a 1970 Challenger with Hemi and Dana
Posted By:
fury4speed
Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
01:15 AM
All stock mounts , what is the drive shaft length for a 1970 Challenger with a 426 Hemi with a Dana 60 , thanks.
Posted By:
rickseeman
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
03:50 PM
This is what I show
2883667 1970-71 3.25 44.6
Posted By:
stumpy
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
05:35 PM
You would be better off actually measuring it before ordering a shaft.
Posted By:
John_Kunkel
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
06:02 PM
Propeller shafts
Posted By:
DAYCLONA
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
09:01 PM
Originally Posted By rickseeman
This is what I show
2883667 1970-71 3.25 44.6
Agreed, 44.625 center to center on the u-joint bores for a factory length shaft
Posted By:
fury4speed
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
10:56 PM
I also heard Mopars were on the short side , anybody else hear that.
Posted By:
BDW
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/20/18
11:48 PM
Originally Posted By fury4speed
I also heard Mopars were on the short side , anybody else hear that.
That's what I found on mine
Posted By:
Morty426
Re: Drive shaft length for a 1970 Challenger with Hemi and Dana -
07/21/18
05:52 AM
Originally Posted By John_Kunkel
Propeller shafts
That chart shows Coronet the same as Challenger and cuda for a 70-71 with Dana 60
No way that's right
© 2024
Moparts Forums