intake for 360 with magnum heads factory a/c on 70 charger

hello looking for an intake that will work on a 360 with magnum heads,,the eledebrock air gap the thermostat housing is to the right of engine...looks like compressor will hit it...theres a procomp copy that looks like the thermostat is more like stock,but not sure it will work,trying to put all factory brackets back on it...also not sure the throttle cable and kickdown will have to be modified or changed to aftermarket cables....any input would be appreciated...maybe someone has gone through this already,,but couldnt find anything in archives

If you redrill thee intake bolt holes in the heads to the LA pattern than any LA intake will fit as well.

birds eye pic of the procomp

There are threads on this issue here. As mentioned, there are have been drilling guides fabbed up to redrill and tap the heads for the LA angle intake bolts. Also the Engine Quest magnum heads are obtainable predrilled for the LA intake (CH318LA) (Hughes sells them under their own brand).
There are a lot of Magnums out there running LA intakes.
I have the EQ heads and have run the LD4 as well as the Performer intakes on it.
Craig