Distributer O ring

I'm looking for a the O ring for a 5.2l distributer. I figure that I can order one but I'd rather go the a parts store and get one there.

Jegs O rings

AutoZone doesn't list one but I'm sure there is something in their inventory that will work.

What do you guys use on our Mopar distributers?

Thanks

I went thru that a few years ago looking for one local. The ones I found were either too thick or too thin. Ended up getting one from a mopar dealer. I think the part number was 2875923

Specs are here

https://www.rockauto.com/en/moreinfo.php?pk=2663226&cc=1384613&jsn=418

That's what I figured. Just gonna order one at the dealer. Be here Tuesday.

So much for that idea. It looks like it has been discontinued. Maybe a dealer might still have some in stock?

how about autozone
https://www.autozone.com/external-engine...690_790869_1176

Should be a standard o-ring. McMaster Carr has them. I buy bags of them for my distributor plugs and cam sync units.

It's a standard o-ring with industry #133.

Should be the same as a regular dizzy. If so I have several hanging on the wall.

The dealer says that there are 3 at the STL distribution center and 2500 in Detroit. I ordered 3 and they MAY be here Tuesday.

McMaster Carr has 100 of the #133 oring for $11. The dealer will probably charge you $3 each.