Moparts

Wheels on a 67 Valiant Signet 2 DR ??

Posted By: moparmatt

Wheels on a 67 Valiant Signet 2 DR ?? - 04/17/18 06:11 AM

Hello everyone just picked ups very cool very original 67' valiant Signet I know my stock bolt pattern Is 5 on 4" what is the biggest Stock OEM wheel set up that will fit with no rubbing issues? Thank You
Posted By: bbtrux

Re: Wheels on a 67 Valiant Signet 2 DR ?? - 04/17/18 07:04 AM

Well, factory wise , 14' is as good as it gets. Im assuming 6.5 would be the widest possibility,m but the white book guys will chime in soon...
Posted By: moparx

Re: Wheels on a 67 Valiant Signet 2 DR ?? - 04/17/18 04:20 PM

not 100% on this, but i believe the largest 14", 4"bp wheel was 5 1/2" wide.
beer
Posted By: Jim_Lusk

Re: Wheels on a 67 Valiant Signet 2 DR ?? - 04/17/18 04:51 PM

Originally Posted By moparx
not 100% on this, but i believe the largest 14", 4"bp wheel was 5 1/2" wide.
beer


I believe this is correct, including rallye wheels.
Posted By: Blues_Cuda

Re: Wheels on a 67 Valiant Signet 2 DR ?? - 04/18/18 02:33 AM

It's been 25-30 years, but I had 14x5.5" small bolt Rallyes on 245/60's on the back of my '68 Valiant. I believe I had the same size tire on 14x7 Centerlines. I cannot recall the backspace on the Centerlines at this point.

Attached picture Valiant1.jpg
Attached picture Valiant-Centerlines.jpg
© 2024 Moparts Forums