Moparts

2006 Chrysler 300c question

Posted By: bracketcharger

2006 Chrysler 300c question - 03/13/18 10:34 PM

I have a 2006 300c 5.7 awd. Can anyone tell me if the rear outer cv joint can be replaced or does replacement require a complete shaft. Thanks in advance.
Posted By: 68Cbarge

Re: 2006 Chrysler 300c question - 03/13/18 10:48 PM

Nowadays it is best to replace the complete axle assembly.
Unlike some older cars where the CV joint could be rebuilt,it is not feasible.
I cannot find a listing for the CV joint by itself--just the complete assembly.
Hope this helps.
Posted By: bracketcharger

Re: 2006 Chrysler 300c question - 03/15/18 05:52 AM

Thanks 68Charge for the reply, I couldn't find a cv joint just a complete shaft. Too bad the outer cv joint can't be serviced, replaced quite a few on other vehicles when I was turning wrenches for a living. This must be what they call "progress". Thanks again.
Posted By: a12rag

Re: 2006 Chrysler 300c question - 03/17/18 04:30 PM

LOL . . .yes, progress . . . but then again, you have to admit - a hemi, WITH AWD, especially the 06 setup where you are having the front wheels driven all the time, makes for a great machine in winter AND summer !!!
© 2024 Moparts Forums