Posted By: Spraygoon
Throttle Cable Help - 02/09/05 12:03 AM
I saw a site that listed Chrysler part #'s that were supposedly still good at the local dealership for different length throttle cables. I have looked and looked and can't find it again. Does antone know where it is or where I could get this info. Know where I could get a cable made???? I have a 64 Fury with a 440 and a Performer RPM manifold. I have the taller cable bracket which lines up nicely with the carb but makes the stock cable way too short. Any other suggestions would be appreciated.
Thanks
Paul Reber
--------------------
Paul Reber
Posted By: AndyF
Re: Throttle Cable Help - 02/09/05 12:05 AM
I have a list on my website in the article section.
www.arengineering.com
Posted By: Anonymous
Re: Throttle Cable Help - 02/09/05 12:16 AM
You probably need a cable with a round metal fitting at the fire wall. I am guessing at about 24" long? Pioneer part number CA-8418 is what you need. It's about $18-$25 at any Carquest auto parts store or from
www.partsamerica.com The version with a snap in square plastic clip for the firewall is CA-8411, 23" long.
Posted By: Anonymous
Re: Throttle Cable Help - 02/09/05 12:26 AM
Thanks Andy, or I should say thanks to the boss for the use of the plastic!
Posted By: Anonymous
Re: Throttle Cable Help - 02/09/05 12:38 AM
How much did the Mopar cable cost?
Posted By: gtx69
Re: Throttle Cable Help - 02/09/05 09:33 PM
I brought one throgh dealer $54.00
Posted By: Anonymous
Re: Throttle Cable Help - 02/09/05 09:37 PM
Quote:
I brought one throgh dealer $54.00
ouch 
Posted By: gtx69
Re: Throttle Cable Help - 02/09/05 09:42 PM
Didn't have a choice need't it right now!
Posted By: Anonymous
Re: Throttle Cable Help - 02/09/05 10:51 PM
hahah. im 17 so i just go to the local bike shop and get brake cables. hey! whatever works
Posted By: B_Body_Bob
Re: Throttle Cable Help - 02/22/05 09:05 PM
That's pretty much what the Lokar cable is, with fancy ends to make it easy to connect it to the carb.