What's correct for a 1972 Demon

Going with the steel wheels and dog dish caps on the Demon this year. What's correct, the plain no call out hub caps, or the dodge emblem and red ring. I thought it was the plain cap.

I thought the plain was Plymouth only....

Could of been Plymouth only, but I'm not 100% sure. I've seen these on Dodges but was unsure, So I'm putting this out to the group to see what's right or wrong.

http://www.hamtramck-historical.com/dealerships/1972DealershipDataBook-02.shtml

Will swap them over in the morning.

Nice car!

Ralph my anal-ness is a curse!!!!

Ron Sannino

It's all about the look. Needs to be right. Just finished polishing them for this weekends SuperCar Race at NED.

Beautiful! Great choice with the wheels by the way...

the man to ask is ScottSmith_Harms on this board.

(sorry, can't get the link to work)

Beautiful Demon. You're not alone. I suffer from anal-nessitis as well.

and i thought the plain was truck.

The plain were used on trucks, vans and '71-up Plymouths.
Also used on Dodge/Plymouth cop cars after 18 holes were stamped into them.

thanks for the clarification ! now, if i can only remember this when needed ! what years were the stainless plain caps used, and when did they switch to aluminum ? i drilled "cop" holes into a trashed set of plymouth lettered caps one time after i ironed out the dents as best as i could. they were a unique cap to say the least. my brother is using them on his A-100 driver.

Ok We are 100% Dodge