RPM Airgap under stock 68 Charger hood

Hi, just finished a 408 build for a friend.
He has a 1968 Charger, the 408 has an Edelbrock Airgap intake.
Any knowledge if it will fit with stock hood?
would like to use the Mopar unsilenced air cleaner.
If this is a no go, what about running a weiand stealth or LD340
The RPM range is Idle to 6000
Thanks

A small block in a Charger....Not really a clearance problem unless you are running a Tunnel Ram. The RPM airgap clears on ALL A body cars too.