Anyone have an old CRANE cam catalog?

Need help identifying the specs for this cam please.

Thanks
Tom

It's not in my 2010 catalog, but going by the numbers it should be:

solid flat tappet, 275@.050, .400 lobe lift, 104lsa.

Those specs are very similar to the old Mini-Express .654 (with 1.5 rockers, so .436 lobe lift), measured at 278@.050, 107 lsa, and requires 1.00" mushroom lifters. Pretty ballsy specs for a .904" lifter...

Cam number is not listed in my 87-88 Crane Master Catalog. Might be older. dc

Too bad Chase Knight retired.
He used to pop onto Moparts and answer Crane questions.

You can contact Crane and they will give you the info on the cam.

In my 78 and 79 catalogue I'm showing a F275/400-8 cam for 273-340-360 and 67-79 318 LA, if that comes close to being what your cam is made to fit. Crane says 275 degrees @.050, 316-316 degrees advertised, 108 centerline on this one though yours appears to be ground on a 104 centerline, .028 hot on intake, .030 hot on exhaust, 0.600 gross valve lift on intake and 0.600 gross valve lift on exhaust also.

Thanks everyone, I'll contact Crane to be sure, but it sounds like John hit the nail!

Tom

John and Fast, to be correct.