Re: Max Wedge Intake - Valve Covers - 12/14/1603:40 PM
I know if you radius the bottom of the carb mounting bases (1/2" radius below the outer carb stud) that the cast Indy covers will come off with a stock Max Wedge intake. Doug
Re: Max Wedge Intake - Valve Covers - 12/14/1607:49 PM
Which Mopar brand valve covers, the chrome steel or the cast aluminum ones The chrome steel work fine Maybe the cast aluminum ones also, I can't remember if I ever used them on any of my stock M.W. cross ram motors now
Re: Max Wedge Intake - Valve Covers - 12/14/1609:05 PM
Yes there is a problem. You'll have to grind or machine the bottom the intake a little bit. Look at the Max Wedge article in the tech archives, I think I had a picture in there that shows the issue.
Re: Max Wedge Intake - Valve Covers - 12/14/1609:52 PM
Originally Posted By AndyF
Yes there is a problem. You'll have to grind or machine the bottom the intake a little bit. Look at the Max Wedge article in the tech archives, I think I had a picture in there that shows the issue.