A body master cylinder help wanted

What master cylinder for a 73 Dart with manual disk brakes? Drums on rear.

?? Not sure what the question is.

Stock replacement RAYBESTOS MC36412

1 1/8" bore.

Thank you. I had to do a conversion. Must be the car was an early one or something. Just making sure the stock type is the right deal. Again thank you

whoa...no way to a 1 1/8 bore!!!! that's for a D150! Pedal will be as hard as a rock.

The stock is 1 1/32. I would use a 15/16 personally.

Can't add much to what goldduster318 stated.... albeit my application is race only, I prefer having a little pedal travel/feel if I need to grab brakes at the stripe. Can't remember what bore I had on the Mirada, but it was like pressing your foot against a wall....hated that. The 15/16" I have in the Duster is just right in my book.

Damn, brain farted it, saw 1 1/32", wrote 1 1/8".

Per FSM Manual Disc brakes, A body. M/C bore 1.032"

raybestos # F88787 1 1/32" bore as stated.