Posted By: kielbasa
Hughes Engines did good on me - 06/16/16 12:05 AM
Purchased a set of rockers arms 3 years ago - am getting to assembling the engine now finally. Anyways, I noticed the new shafts are grooved and they exchanged for my old ones (nongrooved) on the house - Thanks Hughes!
Posted By: RapidRobert
Re: Hughes Engines did good on me - 06/16/16 01:34 AM
are you talking about the angled hacksaw thin slits across the bottom 15 deg offset oiling holes on the shaft? I would prefer those. what am I missing here? Dave Hughes sold me a circle track cam & the RPM range was higher than what I ideally would have wanted but when the eng (360) got "up on the cam" ~6200 ish it came alive like you wouldn't believe, it was like a shot of nitrous
Posted By: jbc426
Re: Hughes Engines did good on me - 06/16/16 05:11 AM
I've been dealing with them for over a decade now. They have always done me right. Great knowledge and sound advice, too.