Moparts
Cherry Picker
Posted By:
Wagonman1967
Cherry Picker -
01/13/16
04:40 AM
I want to stab the 440-727 at the same time.Will one of the Hobo Freight 2 ton pickers set on the 1/2 ton setting handle the weight? Any body done it?
Posted By:
stumpy
Re: Cherry Picker -
01/13/16
06:04 AM
I had no trouble stabbing a 360-727 combo in a D100 truck with one of their fold up pickers.
Posted By:
DaytonaTurbo
Re: Cherry Picker -
01/13/16
03:43 PM
I did my 440, 727, k-frame, complete front suspension with tires still attached and there was no issue.
Posted By:
Rhinodart
Re: Cherry Picker -
01/13/16
04:10 PM
Same here, but the rams only last a couple of years before you have to buy a new one, or try to put new seals in it...
Posted By:
Wagonman1967
Re: Cherry Picker -
01/13/16
08:00 PM
Thanks I will give it a whirl.
Posted By:
80mirada
Re: Cherry Picker -
01/14/16
05:33 AM
Run the ram all the wat up and clean it with a soft rag and wd40 or jack oil usually helps the seals last longer. Mine has done it no problem.
Posted By:
dogdays
Re: Cherry Picker -
01/14/16
07:12 PM
My ram has lasted since 1984. Occasionally I forget and leave it up, then have to scour the rust off but it still works. Maybe a hydraulic supply house could get you a better seal?
R.
Posted By:
Polarapete
Re: Cherry Picker -
01/15/16
04:30 AM
Most of the hydraulic 8-ton long rams that I have seen are made in China and therefore disposable.
© 2024
Moparts Forums