Where to get a longer Battery Cable for Mini Starter?

Since I put TTI's on my engine I went with a Mini starter. The mini starter causes you to spin the cable around to attach it, this in-turn makes the cable's effective length shorter.
What cable could I use to get that length back so I can secure the Battery cable to fenderwell and not have to go over the steering shaft as pictured??? 1972 Satellite with 400.
Thanks Ron

Wouldn't it be easier to get a longer positive battery cable, available at any parts store, and move the starter relay closer to the starter?

you must be new here ...

A 71-72 B-body small block positive battery cable is about 6"-7" longer than the big-block version.

John knows me well, I wouldn't move my relay and I hate to use a generic cable. The small block one suggested may work will have to do some measuring.

Any other thoughts?
Ron

Not a lot of options with Hooker's...

I fabbed a bracket to keep it away from the tubes...

What he said

Done it on a few cars with great results

Very good to know, any pictures to show.
Ron

Rick thanks for this information!!!
Ron

P/N 3764166

Awesome .. Great idea
I saved this part number , i needed one yesterday .. Dammik.

Wish i too . ould get a small block Hemi cable . Lol ..
I need a part number ..

Pretty straightforward to make what you need. NAPA carries the heavy cable, ends and shrink wrap. Measure, crimp, solder and shrink wrap makes a durable and neat looking cable.

On my '63 B, I ran the cable to the front of the engine and down and behind the motor mount and header. Much cleaner if you haeve the room. Not necessarily a stock look but the dipstick and motor mount aid in keeping it up against the block and away from the header.

If you're going to fabricate one to resemble your stock part, use ultrafine welding cable, it's better. S/F...Ken M