Posted By: cptn60
Duplicating a cam? - 01/21/09 02:40 PM
Got an old cam with a lobe chipped on it. Anyone have a source for duplicating this one? Don't want it reground, just another one like it only chipless.
Duplicating a cam?
Posted By: Mr.Yuck
Re: Duplicating a cam? - 01/21/09 02:44 PM
what is it for??
Posted By: cptn60
Re: Duplicating a cam? - 01/21/09 03:21 PM
It's an old Crower Monarch cam. Hydraulic, single bolt B/RB. Had the cam since 1979.
Posted By: StealthWedge67
Re: Duplicating a cam? - 01/22/09 12:48 AM
Call Delta Camshaft, in Tacoma WA.
Posted By: Mr.Yuck
Re: Duplicating a cam? - 01/22/09 12:58 AM
swap meets?? e-bay??? c-list?? I'm sure somebody could grind you one to specs if you needed it that bad.
Posted By: lewtot184
Re: Duplicating a cam? - 01/22/09 01:57 AM
call crower. if they still have a master they can grind one.
Posted By: calrobb2000
Re: Duplicating a cam? - 01/22/09 05:16 AM
hi
i got you beat , i have one i bought in 1969 and ran in a 413 in my 64 ply .had eld intake with 950 3bbl 3.91 gears
told everyone i had a 383 , so i had the fastes 383 around !
made the ford and chevys crindge !
it was 280* with 450 lift .
cam and kit = cam ,lifters, springs, aluminum retainers $135.00 at the time .
idel would vibrate the neighbors house windows even with hemi mufflers .
i got you beat , i have one i bought in 1969 and ran in a 413 in my 64 ply .had eld intake with 950 3bbl 3.91 gears
told everyone i had a 383 , so i had the fastes 383 around !
made the ford and chevys crindge !
it was 280* with 450 lift .
cam and kit = cam ,lifters, springs, aluminum retainers $135.00 at the time .
idel would vibrate the neighbors house windows even with hemi mufflers .