Posted By: b_body_fan
Cleaning the firewall after volt regulator/ecm failure - 07/02/15 12:35 AM
Does anyone have any tips or suggestions for cleaning the melted stabilizing gel from the firewall after a voltage regulator/ecm failure? Is there a product that will help clean it up? What about using a heat gun?
Posted By: feets
Re: Cleaning the firewall after volt regulator/ecm failure - 07/02/15 12:59 AM
Be careful with the heat. You can burn the paint off too.
Posted By: TheBlueBeast
Re: Cleaning the firewall after volt regulator/ecm failure - 07/02/15 04:36 AM
No idea on cleaning up that mess.
It is part of the charm of owning a Mopar.
Posted By: solarguy
Re: Cleaning the firewall after volt regulator/ecm failure - 07/02/15 10:50 AM
I had that happen, Goo-Off, some wd40 and lots of elbow grease
Posted By: Hooligan
Re: Cleaning the firewall after volt regulator/ecm failure - 07/02/15 04:33 PM
I thought it was called "Goof-off"? No wait! That is what I am doing now!
However, I agree with your suggestion. A gold star for you!