new acc e body carpet. . how far foward?...w/pics.....

I have the back carpet laid in. Its bout as good as its gonna get
The front..... how faw foward does it go? I really like to have the foot pad as close to where its should go. Any one have a nice pic showing the pad In Relation to the gas pedal?
Will any of the carpet up on the firewall area need trimed like on the sides?

I don't have a picture, but I bought one last year, pedal ended up placed well, on the front corner of the plastic piece. I had to trim the front a bit to fit smooth under the heater box. Lay it in place and pull it as far forward as the transmission hump will let you.

EDIT: Sorry nevermind, just realized you said E body.

Just finished this a couple of weeks ago. This is ACC loop carpet with padding in a 1970 Barracuda.

I am NOT an expert at laying down auto carpet and I did not look at many photos to see how high it is supposed to go but this is where the carpet naturally wanted to go based on the shape ACC put into it.

I trimmed a little along the top so the carpet ended at the firewall insulation. Since I used Dynomat, I let the carpet stay a little long in order to hide the shiny aluminum backing.

I can take as many photos as you like so please let me know if you want to see a different area.

-Steve

Quote:

---

I have the back carpet laid in. Its bout as good as its gonna get
The front..... how faw foward does it go? I really like to have the foot pad as close to where its should go. Any one have a nice pic showing the pad In Relation to the gas pedal?
Will any of the carpet up on the firewall area need trimed like on the sides?

---

Here's an E body factory vintage photo, doesn't get anymore correct than this

Mike