Posted By: demongup
Max wedge - 02/23/15 04:23 AM
Rocker stands
I believe these are OEM
Value on them ?
I believe these are OEM
Value on them ?
Max wedge
Posted By: Cab_Burge
Re: Max wedge - 02/23/15 06:33 AM
Those are not OEM M.W. stands 
Those are for the stock 361 to 413 1958 to 1963 hydraulic lifter motors with stock stamp steel rockers, not for the ductile iron adjustable rockers like needed for the M.W. motors those last two years 
Those are for the stock 361 to 413 1958 to 1963 hydraulic lifter motors with stock stamp steel rockers, not for the ductile iron adjustable rockers like needed for the M.W. motors those last two years
Posted By: 64dodge572
Re: Max wedge - 02/23/15 05:05 PM
If you mill the tabs off they are the same.
Posted By: Centerline
Re: Max wedge - 02/24/15 04:58 AM
Quote:
Rocker stands
I believe these are OEM
Value on them ?
Those are aluminum roller tip adjustable rockers. Definitely not OEM Max Wedge. Those engines came with ductile iron MP rockers and shafts which would look very similar to these.
Posted By: stumpy
Re: Max wedge - 02/24/15 06:31 AM
He's talking about the stands not the rockers.
Posted By: Centerline
Re: Max wedge - 02/24/15 07:38 PM
My bad. Guess I read it too fast.
Posted By: 70440+6bbl
Re: Max wedge - 02/25/15 03:22 AM
Here is a factory complete set-up that I owned (426TMPHC engine), notice the lack of the "ears".
Posted By: hemi-itis
Re: Max wedge - 02/25/15 05:18 AM
Musta sold for a pretty penny!!