6-Pack Outboard Carb Air Mixture Screws

Posted By: 72hemi

6-Pack Outboard Carb Air Mixture Screws - 02/03/15 05:10 AM

I hope I posted this in the right area. I have been searching for a couple of weeks now and cannot find the answer. I am in search of a pair of the air mixture screws for the outboard carburetors on a 340 6-pack (probably the same on all 6-packs). On the outboard carburetors they are located in the mounting base plate and usually have solder covering them so people won't adjust them.

Are they still available or is my best bet to just upgrade to the Promax billet throttle plate with the 45 degree mixture ports?

Posted By: Cab_Burge

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 05:40 AM

Do you have one to compare them to a standard Holley mixture screw out of a regular 4 barrel carb. like the early List # 1850 carbs? If not try calling the The Carb Shop, 909-947-3575 and ask them if they have them or not

I've never tried comparing the two against each other but it wouldn't suprise me that Holley kept them the same

If not try calling the Corvette Shop in Chicago, IL they (sorry, no phone number for them now

) may have some left also

They bought all the surplus sixpak two barrel carbs parts from Holley a lot of years ago

Good luck

Posted By: DAYCLONA

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 12:11 PM

You can get a set from Sixpack Solutions along with their special tuning tool to access them about $50 IIRC

Contact Moparts Member 69sixpackbee....or you can contact him (Bud Weaver) at supr69bee@roadrunner.com

Posted By: 62maxwgn

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 03:31 PM

Quote:

Do you have one to compare them to a standard Holley mixture screw out of a regular 4 barrel carb. like the early List # 1850 carbs? If not try calling the The Carb Shop, 909-947-3575 and ask them if they have them or not I've never tried comparing the two against each other but it wouldn't suprise me that Holley kept them the same If not try calling the Corvette Shop in Chicago, IL they (sorry, no phone number for them now ) may have some left also They bought all the surplus sixpak two barrel carbs parts from Holley a lot of years ago Good luck

Still have them,M1513B,$4.75 ea.

PH.# 708 458 2500

Posted By: 72hemi

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 04:02 PM

Thanks I will give Chicago Corvette a call. I really appreciate the input!

Posted By: KARLN

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 05:35 PM

highly recommend, Contact Moparts Member 69sixpackbee....or you can contact him (Bud Weaver) at supr69bee@roadrunner.com

without the adjusting tool, you won't be able to adjust when the carbs are mounted.

Posted By: DAYCLONA

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 07:05 PM

Quote:

highly recommend, Contact Moparts Member 69sixpackbee....or you can contact him (Bud Weaver) at supr69bee@roadrunner.com

without the adjusting tool, you won't be able to adjust when the carbs are mounted.

Best advice.....

Posted By: 72hemi

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 07:05 PM

I just talked to Chicago Corvettes and they sold of them and all the dealers they sold them to they called back and they have all sold their supplies. I will contact 69sixpackbee

Posted By: mopar346

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 08:28 PM

I'm just interested in the tool, anybody got a picture of it???

Posted By: 72hemi

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 09:17 PM

Quote:

I'm just interested in the tool, anybody got a picture of it???

The tool only works with Bud's custom screws. Check out the following thread:

https://board.moparts.org/ubbthreads/show...amp;Search=true

Posted By: mopar346

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/03/15 09:37 PM

Quote:

Quote:

I'm just interested in the tool, anybody got a picture of it???

The tool only works with Bud's custom screws. Check out the following thread:

https://board.moparts.org/ubbthreads/show...amp;Search=true

I'm OK with that, I'll have to read through it later.

Posted By: 69sixpackbee

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/05/15 12:14 AM

Sorry guys for not chiming in.
I do have the kits still available. Many of the wintertime "work in the garage" guys swamp me with orders but I am in production with about a one week backlog.
Thanx to all who have had interest in my kit and a big thanx to those who use them!
The price is still the same. $45.00 for the 2-screw setup and $60.00 with all four including shipping.

I have some updated images.
Those I posted were from long ago when I was prot'ing the setup.

Here's some new ones:

Thanx,

Bud Weaver
Six-Pack Solutuions!

Attached picture 8419127-DSC00133.jpg~original.jpg

Posted By: mopar346

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/05/15 03:01 AM

That's awesome. Thanks Bud

Posted By: 72hemi

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/06/15 06:03 PM

Thanks bud! Looking forward to installing the new screws.

Posted By: 69sixpackbee

Re: 6-Pack Outboard Carb Air Mixture Screws - 03/19/15 05:52 AM

Thanx EVERYONE!
I hope these worked out well for you all.

Bud Weaver
Six-Pack Solutions!

Posted By: Pynzo

Re: 6-Pack Outboard Carb Air Mixture Screws - 03/19/15 01:12 PM

I was going to order a set from your eBay ad. Can I order a set directly from you instead and save you the sellers fee? Pm me for my paypal info and thanks!

Posted By: 69sixpackbee

Re: 6-Pack Outboard Carb Air Mixture Screws - 03/20/15 12:50 AM

Yes! PM sent

Posted By: fastnos

Re: 6-Pack Outboard Carb Air Mixture Screws - 03/23/15 03:12 AM

I ordered a set of these and they work great. Will recommend these over and over again. Special tool is definately a time saver!!

Posted By: 69sixpackbee

Re: 6-Pack Outboard Carb Air Mixture Screws - 03/23/15 07:18 AM

Quote:

I ordered a set of these and they work great. Will recommend these over and over again. Special tool is definately a time saver!!

Thanx again, Joe!

Posted By: sogtx

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/11/16 12:52 PM

Hey, has anyone else ordered these ?
Are they still available ?
Any one order any recently ?

Posted By: ScottSmith_Harms

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/11/16 03:38 PM

Yes, Bud still sells them, very nice upgrade, I just installed several sets with zero issues.

Bud weaver (Supr69bee@roadrunner.com)

Posted By: sogtx

Re: 6-Pack Outboard Carb Air Mixture Screws - 02/11/16 08:17 PM

Yes, cant get a reply .. But maybe not enuff time..
Scott - can u pm me phone # if you have , thNks!
Im workin on a couple sets .. Itll be spring soon !

Posted By: 69sixpackbee

Re: 6-Pack Outboard Carb Air Mixture Screws - 06/10/16 05:38 PM

They're still available.

Bud Weaver
Six-Pack Solutions!