Moparts

Edelbrock Valve spring specs?

Posted By: cudazappa

Edelbrock Valve spring specs? - 12/27/14 03:16 AM

I have been looking for the part number and specs on the valve springs that my Edelbrock 60779 heads came with. Can anybody help? Been looking to no avail.
Posted By: Dunnuck Racing

Re: Edelbrock Valve spring specs? - 12/27/14 03:42 AM

I can get them for you tomorrow when I'm back in the shop.
They are in the 130 seat pressure 325 open pressure range if that helps.
I can't remember the exact specs but that's close
If you look at their website it should list them. If not try Summit racing by looking up the heads and go to replacement parts for them.
Otherwise I'll look in the morning
Keith
Posted By: cudazappa

Re: Edelbrock Valve spring specs? - 12/27/14 04:06 AM

Thanks. That did the trick in 30 seconds!
Edelbrock Sure Seat Valve Springs 5767
Posted By: Rob C

Re: Edelbrock Valve spring specs? - 12/31/14 01:55 AM

Try this page Gary. All springs are listed.
http://www.edelbrock.com/automotive/mc/cylinder-heads/dl/valve-springs-retainers.pdf
© 2024 Moparts Forums