Posted By: mopar346
Alternator tool - 12/22/14 02:47 AM
Not too aweful long ago there was a thread about someone building a replica of the factory alternator tightening tool. DId he ever market it? If not are there any other sources?
Thanks in advance, Kevin
Posted By: RapidRobert
Re: Alternator tool - 12/22/14 09:35 AM
Kevin what gets tightened? The pulley is pressed on/off. What am I missing bro
Posted By: BDW
Re: Alternator tool - 12/22/14 01:12 PM
http://www.cuda-challenger.com/cc/index.php?topic=28569.0http://www.allpar.com/news/index.php/2013/12/new-tool-for-old-alternators-starter-repairI've always just grabbed it from underneath and pulled up while tightening with the other hand.
Unless you do this on multiple cars everyday, seems like a waste of money.
Posted By: hemirdrnnr
Re: Alternator tool - 12/22/14 02:01 PM
Dang all these years I used a screw drive for leverage!
Posted By: 70440+6bbl
Re: Alternator tool - 12/23/14 04:55 AM
I'm pretty sure member Resq302 is the fellow here that made and sells them.
Posted By: mopar346
Re: Alternator tool - 12/23/14 05:18 AM
Thank you, I searched his name and came up with the thread. I PMed hiim as well.
Thanks again.
https://board.moparts.org/ubbthreads/show...rue#Post7988197
Posted By: therocks
Re: Alternator tool - 12/23/14 05:07 PM
After almost 50 years Ive never used one.I do have a tool for GM tylpe alts that I used at work because some were tough to get to.I guess if you like to spend $$$ its worth it.Rocky