Moparts

67-69 stock dart hood with bumps

Posted By: dart67

67-69 stock dart hood with bumps - 12/21/14 12:52 AM

I have a chance to pick up a hood with the long narrow bumps, one on each side of the hood, for my 67 dart. The inserts are gone. Anyone know if I can buy the inserts separate and where? Not lookin for original if there is a cheaper aftermarket alternative. This is far from a high dollar car.

Thanks, Kevin
Posted By: mikemee1331

Re: 67-69 stock dart hood with bumps - 12/21/14 01:13 AM

Quote:

I have a chance to pick up a hood with the long narrow bumps, one on each side of the hood, for my 67 dart. The inserts are gone. Anyone know if I can buy the inserts separate and where? Not lookin for original if there is a cheaper aftermarket alternative. This is far from a high dollar car.

Thanks, Kevin


I see them for 68-69 dart at Classic industries but they are over $300 ! maybe a decent used set on Ebay or check the parts swap on here.
Posted By: mopar346

Re: 67-69 stock dart hood with bumps - 12/21/14 02:58 AM

I have gotten a few sets at shows for $30-50 not perfect mind oyu but good driver quality.
Posted By: dart67

Re: 67-69 stock dart hood with bumps - 12/21/14 04:12 AM

Thanks! Driver quality is all I want. Granny car. The hood has a huge hole cut in it and will need to weld it up.
Posted By: JohnRR

Re: 67-69 stock dart hood with bumps - 12/21/14 05:42 AM

Which inserts are you going to get?, 67 didn't come with the bulge hood. 68 and 69 are different.
Posted By: dart67

Re: 67-69 stock dart hood with bumps - 12/21/14 05:44 AM

It doesn't matter which. Just trying to fill the area so it looks normal.

Not sure if what i can get is a 8 or 9.
Posted By: mopar346

Re: 67-69 stock dart hood with bumps - 12/21/14 05:55 AM

The sets I was referring to are 69s, 68s are generally more expensive from what I have run accross, argueably cooler looking.
Posted By: dart67

Re: 67-69 stock dart hood with bumps - 12/21/14 06:17 AM

Are the hood openings the same and the inserts different from 8-9?
Posted By: Ramrod39

Re: 67-69 stock dart hood with bumps - 12/21/14 06:31 AM

'68 and '69 hoods are the same. Inserts look different but will interchange.
Posted By: Rhinodart

Re: 67-69 stock dart hood with bumps - 12/22/14 02:37 AM

68 and 69 hoods are not the same. The underhood bracing is different as the 69 had crumple zones and three holes punched in the drivers side for the DODGE emblem for the 340 Swinger. Of course the holes are also different between the 68 GTS letters (3 sets of holes), the 69 GTS letters, only two holes, and the 69 Swinger holes. Besides they are the same...
Posted By: Ramrod39

Re: 67-69 stock dart hood with bumps - 12/23/14 05:23 AM

I stand corrected.

I just knew that you could swap a '69 hood onto a '68 and vice versa.
Posted By: Rhinodart

Re: 67-69 stock dart hood with bumps - 12/23/14 05:36 AM

I get a bit anal with 67-69 Dart parts...
Posted By: gdonovan

Re: 67-69 stock dart hood with bumps - 12/23/14 01:16 PM

Quote:

The sets I was referring to are 69s, 68s are generally more expensive from what I have run accross, argueably cooler looking.



I like the '69 inserts myself, to each their own!
Posted By: mopar346

Re: 67-69 stock dart hood with bumps - 12/23/14 03:45 PM

Quote:

Quote:

The sets I was referring to are 69s, 68s are generally more expensive from what I have run accross, argueably cooler looking.



I like the '69 inserts myself, to each their own!



I think I like 69s better too but that is why I said argueably cause I know some have a different view, you gotta admit the 68s are cool.
© 2024 Moparts Forums