Does anybody make multiport injection for a 383-400?

Does any company make a multiport injection complete system for a 383-400 motor? If no company makes one, what would be a good choice of aluminum intake manifolds to modify a 383-400 manifold to put a multiport injection system together?

Yes, check out F&B

http://www.fbthrottlebodies.com/

I think Edelbrock makes a single plane EFI intake for B and RB.

In general, you pick the manifold based on application as if you were running a carb. My 400 based stroker uses a M1 single plane manifold with FI bungs tig'ed in place. I thought the good sized single plane was best for my build and started with that. Dual plane manifolds are candidates also... however they tend to have more variation in air delivery per cylinder vs single plane as I understand.

Most conversion shops work with single planes.

Just from a packaging standpoint, the runners on a single plane are much easier to machine and mount the injectors so one can use a fuel rail that connects all the injectors on a bank.

R.

Indy's website and catalog show that they have a couple of B EFI intakes. I don't know if either of these actually exist and can be ordered.

400-30 - This might have Max Wedge ports? $750 includes fuel rails.

400-I4-MMBOEFI - Mod-Man intake... still needs a top plate for the intake. $750 + $135 top plate.

As far as I am aware, there are no other new EFI intakes for the B engine. Edelbrock only makes an EFI intake for the RB.

The going rate to convert an existing intake that you provide seems to be $500-$600... so those Indy prices aren't completely out to lunch by the time you factor in an additional $100-$200 if you have to buy an intake to convert.

I am planning to convert a used Torker intake myself.

Quote:

---

Does any company make a multiport injection complete system for a 383-400 motor? If no company makes one, what would be a good choice of aluminum intake manifolds to modify a 383-400 manifold to put a multiport injection system together?

---

I talked to this guy a few years back about a possible build before all of the plug and play systems came out. He was friendly and quite helpful. Someone correct me if I'm wrong, but I think he did the system for the Green Brick many years ago.

http://rancefi.com