Posted By: 72roadrunnergtx
Need a picture of E-body axle vent bolt/brake hose moun - 10/21/14 05:47 PM
Specifically the clocking position of the threaded vent/bolt hole in the driver’s side tube. Recently received a new Moser Dana speced out for an E-body, concerned the vent location is incorrect. Is there different brake hose mounting for the E-body vs. other models?
Looks like it's too far down the backside of the tube compared to where it was located on the modified 8 3/4" diff that came with this car.
Looks like it's too far down the backside of the tube compared to where it was located on the modified 8 3/4" diff that came with this car.
