AMD rear valance fit

Anyone have feedback on the quality and fit of an AMD rear valance w/tips for a 70 Cuda?


Thanks

I just put one on my Cuda, the fit was just OK. I recommend test fitting before paint to make sure everything lines up. On mine one side bolted right up but on the drivers side the holes were off a good half inch. This was with new AMD quarters and trunk extensions on both sides. I had to really work it to get it looking right on the outside.

Thanks for the good info…..think I will keep trying to find an original valance before settling on an aftermarket.

If your putting new quarters on a car, you have to install the rear valance before you finish welding the lower rear quarters or good luck getting a valance to fit..

Quote:

---

If your putting new quarters on a car, you have to install the rear valance before you finish welding the lower rear quarters or good luck getting a valance to fit..

---

Unfortunately on my car the quarters were already done when I bought it and my original was too far gone.