Moparts

vinyl top and glass install

Posted By: mopfried

vinyl top and glass install - 09/22/14 11:37 PM

I had a new vinyl top installed on my 74 Scamp. I am putting in a new windshield and back glass. how far should the vinyl go under the windshield gasket??
Posted By: mopfried

Re: vinyl top and glass install - 09/23/14 02:42 AM

no one? Should it go under the windshield gasket at all?
Posted By: bri440

Re: vinyl top and glass install - 09/23/14 03:32 AM

I'm no expert - I've installed one vinyl top. I ran mine down the vertical edge of the frame and stopped there. Cut out for the welded trim clips. Some clips use screws, so add some sealant to the screws. The horizontal surface stayed clean for the window gasket to seal.

Good luck.
Posted By: mopfried

Re: vinyl top and glass install - 09/23/14 03:36 AM

thanks? I didn't pay attention... how are the factory ones done?
Posted By: screamindriver

Re: vinyl top and glass install - 09/24/14 01:38 AM

Pretty much the same as he's describing other than the factory used metal staples in some areas to hold the top on..They wanted to make sure it was secured the fast and easy way..
© 2024 Moparts Forums