Moparts

Big Block Dual Feed Line

Posted By: njdevil2

Big Block Dual Feed Line - 09/19/14 06:02 PM

Hey…..need some real help here.
Jegs has no clue and I can’t wait on hold with Holley for hours on end…..
1970 roadrunner 383. DP4B intake. I have a 670 Street Avenger carb and the
dual feed line clashes with the distributor. Is there a dual feed line or something
that I get to make this work? I thought there was something available but
I can’t find nor remember what it was. Any suggestions? Thanks!!
Posted By: toplescuda

Re: Big Block Dual Feed Line - 09/19/14 06:13 PM

You either have to bend the end or do like I did and make your own out of brake line and a t block
I fit mine real closse to the valve cover and under the dist following the block down to fuel pump
Posted By: skicker

Re: Big Block Dual Feed Line - 09/19/14 06:54 PM

I turned mine around backwards and ran the fuel line up on the RH inner fender well where it connects to the filter housing and then down to the fuel pump.

A friend of mine has one on a 440 that has a braided line in the center which lets you bend the front down a little to clear the dizzy. Both ideas work well.
Posted By: 383man

Re: Big Block Dual Feed Line - 09/19/14 09:15 PM

I bought this dual feed at a local speed shop and it works perfect. Gets the fuel line away from the dist and solved the problem. Ron

Posted By: scratchnfotraction

Re: Big Block Dual Feed Line - 09/19/14 09:29 PM

Quote:

Hey…..need some real help here.
Jegs has no clue and I can’t wait on hold with Holley for hours on end…..
1970 roadrunner 383. DP4B intake. I have a 670 Street Avenger carb and the
dual feed line clashes with the distributor. Is there a dual feed line or something
that I get to make this work? I thought there was something available but
I can’t find nor remember what it was. Any suggestions? Thanks!!



could do it like a ferd cobra jet holley 4-v duel feed line.

feed it from driver side. or fab up your own with some brass JIC fittings and some alum line/tube nuts with an-6 carb bowl fittings.

Attached picture 8275085-holleycarbduelfeed.jpg
Posted By: scratchnfotraction

Re: Big Block Dual Feed Line - 09/19/14 09:34 PM

build your own with alum line tube nuts tee fitting.

put the tee in the center and run fuel line by VC rail then 90* over to tee fitting.

with some thought you can come up with some nice looking lines that work.

Attached picture 8275088-aedfuelline.jpg
Posted By: scratchnfotraction

Re: Big Block Dual Feed Line - 09/20/14 12:29 AM

could always plumb and solder a set of ridged copper lines for it.

Attached picture 8275233-spitoontruck1.jpg
Posted By: dynamite

Re: Big Block Dual Feed Line - 09/20/14 02:51 AM

Turn it around and feed from the rear..
Posted By: frank

Re: Big Block Dual Feed Line - 09/20/14 03:21 AM

This is what I have on my 670 SA. Metal line and hardware store brass blocks. Just bend some tube and flair.

Attached picture 8275346-20140919_181342.jpg
Posted By: frank

Re: Big Block Dual Feed Line - 09/20/14 03:22 AM

with the feed line attached

Attached picture 8275350-20140919_181412.jpg
Posted By: rcgtx

Re: Big Block Dual Feed Line - 09/20/14 04:34 AM

There used to be a company called Fine Lines. They made factory style dual feed fuel lines. I had one on my 440 challenger. It fit great.
Posted By: Commando1

Re: Big Block Dual Feed Line - 09/20/14 02:38 PM

I used two of his sets.
I take it he's no longer around?
Posted By: Challenger 1

Re: Big Block Dual Feed Line - 09/20/14 02:51 PM

I got a 3 piece set of fuel lines from them in about 24 hours about 2 years ago. They fit great too BTW.
Posted By: njdevil2

Re: Big Block Dual Feed Line - 09/20/14 03:19 PM

Looks like FinLines is still there.....checking out the web site right now. Looks like there are some kits and parts/pieces. My brother in law is checking on something so if he doesn't come up with ideas local, this is most likely the way to go.
Posted By: 1MYTGTX

Re: Big Block Dual Feed Line - 09/20/14 07:34 PM

Greg from Fabulous Fabrications made mine long ago. IIRC he still makes them.

303-666-9882 or sixpackbee@AOL.com

Attached picture 8275825-4-11-20068-44-52PM_0006.JPG
Posted By: Cudajon

Re: Big Block Dual Feed Line - 09/20/14 08:11 PM

Heres mine. I used a Holley fuel pressure limiter as the splitter because I have an electric pump and If left unchecked provided to much fuel pressure for my carbs. [image][/image]
Posted By: TooMany62s

Re: Big Block Dual Feed Line - 09/21/14 12:25 AM

Got mine from Greg at Fabulous Fabrications years ago too. Fuel pump to carb set fit great.
© 2024 Moparts Forums