Posted By: moparpollack
Who has installed a steering ujoint on mopar? - 05/26/08 03:50 PM
I want to get rid of the stock steering joint on my car and go to a solid u joint. Has anyone done this and where did you get the joint?
Quote:
Quote:
it is not too difficult to install but i didnt find it easy either. drilling the hole through the steering shaft for the roll pin was a PITA and you have to be careful when cutting the shaft … i did it exactly like the instructions told me to and ended up with a steering shaft which was 1" too short. so better take some measurements BEFORE cutting …
Quote:Quote:
Does this set up still allow for in and out action that the original coupler allows for?
Quote:Quote:
it is not too difficult to install but i didnt find it easy either. drilling the hole through the steering shaft for the roll pin was a PITA and you have to be careful when cutting the shaft … i did it exactly like the instructions told me to and ended up with a steering shaft which was 1" too short. so better take some measurements BEFORE cutting …
Yep,thats what I thought. Yours is the one for power steering?