130 tooth external balanced flywheel.

I have a flywheel with casting #2284598 and a part number painted on that is #2264597. The flywheel has the 3 large holes drilled into it. Is this a correct 360 external flywheel? Thanks

What diameter holes?

If you mean the 3 large drilled holes , they are close to an inch .

The three holes on the 360 LA flywheel are 1 13/64" in diameter, the 360 Magnum holes are smaller. All 130-tooth flywheels have the same basic casting from '62-on.

LA and Magnum side-by-side. (Magnum on left)

Ok Thanks for the help.