426 hemi mopar performance 4 bbl intake torque spec

can someone tell me if im installing a mopar performance alum. 4 bbl intake on a 426 hemi is the torque spec go to the regular 40 ft lbs like a 440? Thanks

All I used was the same specs as the stock intake for a Street Hemi.

https://board.moparts.org/ubbthreads/show...amp;Search=true

Quote:

---

All I used was the same specs as the stock intake for a Street Hemi.

https://board.moparts.org/ubbthreads/show...amp;Search=true

---

same here, factory specs, in INCH pounds.. dont forget to retighted after the engine had been run...and cools back down.