RMRE Hemi 1968 Barracuda ?

OK, just one more hoop to jump. On a 1968 Barracuda fastback there is a trim strip along the top of the doors. Your arm would rest here if you were cruising around with window down (155MPH in AH!!!!). It is held in place with 7 rectangular spring clips approx. 3/4" by 5/8" square, small foam piece attached and two legs pointing down to snap in the door.

Where do I get them? I have 3 rusty ones but hate to go to the Dutch without the correct pieces. Thanks for all your help on the other request. This should do it. Stephen

If all fails, go to NAPA and ask for their multi pourpose trim clip box. The box is about 1"x6"x9" and has different size fasteners and some metal flat pieces that you snap to the size you need. I used this kit on my 63 Dodge 330 with the real thin chrome strip down the side. If you need a part number, contact me at sledcity@aol.com and I will dig them out.

If you were local you could come by and take all you need! You shouldn't need them all to hold the trim down.

Quote:

---

If you were local you could come by and take all you need! You shouldn't need them all to hold the trim down.

---

at 155 mph - he might!