Moparts

Electric choke for LD340

Posted By: 68goldfish

Electric choke for LD340 - 09/29/13 12:55 AM

Hi,
I have a LD340 Intake that I plan on using with the stock Carter carb. This intake does not have a pot for the stock choke. Could I adapt a 225 Electric choke Holley #400669 for this combo? Thanks!
Posted By: B7Satellite

Re: Electric choke for LD340 - 09/29/13 01:39 AM

Most of the LD340s that have the Chrysler part number cast into them also have this pad cast onto the exhaust crossover. The pad is for a GM choke thermostat. If the intake does not have the Chrysler part number cast into it then it usually does not have the choke pad. Edelbrock sells their version of the choke thermostat but you can also get one from any auto parts store cheaper. If you have that pad on your intake let me know and I'll see if I can find the part number for the choke.

Attached picture 7869050-LD340(1).jpg
Posted By: B7Satellite

Re: Electric choke for LD340 - 09/29/13 01:40 AM

close up

Attached picture 7869052-LD340(2).jpg
Posted By: B7Satellite

Re: Electric choke for LD340 - 09/29/13 01:47 AM

No Chrysler part number, no choke pad (usually).

Attached picture 7869066-nopartnumber.jpg
Posted By: mosweethemi

Re: Electric choke for LD340 - 09/29/13 03:33 PM

Hello I have two LB4B intakes they have choke pads and I have one that is a LD340 with out a part number and no Choke pad also .
© 2024 Moparts Forums