Posted By: 70Challengerse
Door jam switch.... - 09/19/13 12:50 AM
71 Dodge Demon, where can I find a correct one it is the large 3/8 thread ... Napa keeps sending me the small 5/16 one. What years are these....looking for part #'s thanks 
Door jam switch....
Posted By: Challenger 1
Re: Door jam switch.... - 09/19/13 02:18 AM
I had to take a 3/8" thread off another door switch and install it on my 3 pin switch for my 71 challenger to make it work. It was not a big deal as it looked like both switches were identical, just the threads were different sizes. So Swapped them and both work like new. 
Posted By: 70Challengerse
Re: Door jam switch.... - 09/19/13 05:05 PM
Are there new ones being made? Part #? thanks
Posted By: Challenger 1
Re: Door jam switch.... - 09/19/13 05:12 PM
Not that I know about. Got a picture of how many connectors you need? Are yours spades or pins? the connection? How many wires?
Posted By: 70Challengerse
Re: Door jam switch.... - 09/19/13 05:21 PM
Dome light is not gonna work, just for looks ..Just wanting to fill the hole to make it look like I care.
Posted By: Mapandjlp
Re: Door jam switch.... - 09/19/13 06:57 PM
Hey, Rick. I used ACD6088 switches in my '70 Challenger. Direct screw in replacement to the originals. I got mine from drivewire.com for about $7 each but the site seems to be down. I just bought them in the spring...
Posted By: 70Challengerse
Re: Door jam switch.... - 09/19/13 08:08 PM
Mark , according to the parts house thats the small thread also (5/16)I need it for the large hole...
Posted By: Challenger 1
Re: Door jam switch.... - 09/19/13 08:10 PM
Quote:
Hey, Rick. I used ACD6088 switches in my '70 Challenger. Direct screw in replacement to the originals. I got mine from drivewire.com for about $7 each but the site seems to be down. I just bought them in the spring...
70 is different than 71 even on demons apparently.
Posted By: moparfan53
Re: Door jam switch.... - 09/20/13 03:39 AM
Quote:
71 Dodge Demon, where can I find a correct one it is the large 3/8 thread ... Napa keeps sending me the small 5/16 one. What years are these....looking for part #'s thanks
If your switch has 3 terminals I think you are looking for Chrysler #3488435 that was used in '71/'72. AFAIK, they are not reproduced or available aftermarket. There are some on ebay but are pricey.
http://www.ebay.com/dsc/i.html?LH_TitleD...p;_odkw=3488435
Posted By: Mapandjlp
Re: Door jam switch.... - 09/20/13 04:38 AM
Quote:
Mark , according to the parts house thats the small thread also (5/16)I need it for the large hole...
Sorry, Man. Thought I was helping. Time to sell it and buy a '70!
Posted By: 70Challengerse
Re: Door jam switch.... - 09/20/13 01:37 PM
Quote:70 Demon ????Quote:
Mark , according to the parts house thats the small thread also (5/16)I need it for the large hole...
Sorry, Man. Thought I was helping. Time to sell it and buy a '70!
Moparfan , those are the ones thanks...got a call last night, hoping a friend came thru..
Posted By: denfireguy
Re: Door jam switch.... - 09/20/13 04:09 PM
If you used three diodes to prevent back flow' you could use a single contact switch.
Craig
Craig
Posted By: 70Challengerse
Re: Door jam switch.... - 09/20/13 04:58 PM
Quote:
If you used three diodes to prevent back flow' you could use a single contact switch.
Craig
Will not be functioning,just for looks .. friend came thru, got em... and for 10.00 for the pair..thanks again.. didn't realize the rarity of these...
Posted By: Mapandjlp
Re: Door jam switch.... - 09/21/13 12:50 PM
70 Demon ????
Um, no. That would have to be a '70 Dart.
