Moparts
74 model 8 3/4 truck rear wheel stud knurl diameter.
Posted By:
old_goat
74 model 8 3/4 truck rear wheel stud knurl diameter. -
08/09/13
12:32 AM
I am getting conflicting results from different suppliers.
Wanting longer than stock studs.
Posted By:
340SHORTY
Re: 74 model 8 3/4 truck rear wheel stud knurl diameter. -
08/09/13
01:34 AM
This is Dr Diffs answer to the same question I asked him awhile ago..
I don't stock press-in wheel studs, but these are the rear version I order when I need them:
http://www.summitracing.com/parts/MRG-4311/
All other brands don't fit Mopar axles correctly.
If the truck rotors share the same knurl size as the cars, these should fit:
http://www.summitracing.com/parts/MOR-46180/
Be sure to use anti-seize on the threads.
Posted By:
old_goat
Re: 74 model 8 3/4 truck rear wheel stud knurl diameter. -
08/09/13
01:40 AM
Thanks 340Shorty!
© 2024
Moparts Forums