Moparts

66 fury 3 rear end

Posted By: tbland09

66 fury 3 rear end - 03/07/13 04:13 AM

i have a 66 4 fury 3 4 door with the 318 poly in it i have been searching and searching to find out what rear end it has and if i can get lower gears for it or if i would have to find a different rear end all together?????
Posted By: dodgedartgt

Re: 66 fury 3 rear end - 03/07/13 04:19 AM

Almost without a doubt, when new it had an 8-3/4" rear axle, probably a "741" case. Yes, gear sets are available.
Crawl under the passenger side of the car and look for the seven digit casting number on the nose of the carrier.
Hope it helps,
Mike in FL
Posted By: Cab_Burge

Re: 66 fury 3 rear end - 03/07/13 08:15 AM

Quote:

Almost without a doubt, when new it had an 8-3/4" rear axle, probably a "741" case. Yes, gear sets are available.
Crawl under the passenger side of the car and look for the seven digit casting number on the nose of the carrier.
Hope it helps,
Mike in FL


The last three digits are what tells you which case it has. If it is stock it will have either the 741 or the 742 in it. If not stock it could have the later not so desireable 489 cae in it, check it carefully to make sure which one it is before going forward
Posted By: dOc …

Re: 66 fury 3 rear end - 03/07/13 10:01 AM

Quote:

Almost without a doubt, when new it had an 8-3/4" rear axle, probably a "741" case. Yes, gear sets are available.
Crawl under the passenger side of the car and look for the seven digit casting number on the nose of the carrier.
Hope it helps,
Mike in FL




Yo Mike ..... drivers side
Posted By: RapidRobert

Re: 66 fury 3 rear end - 03/07/13 03:33 PM

Quote:

Yo Mike ..... drivers side


that's my buddy Mikey & I think the Florida sun has cooked his brain a bit
Posted By: Fury Fan

Re: 66 fury 3 rear end - 03/07/13 10:35 PM

Quote:

Almost without a doubt, when new it had an 8-3/4" rear axle, probably a "741" case.



Except I'll go 100% for when it was new. C-bodies had 8 3/4 exclusively until 1971 I believe, then the 8 1/4" started filtering in on the smallblock cars.
Posted By: stumpy

Re: 66 fury 3 rear end - 03/07/13 10:38 PM

match it to the pictures from the tech archives. http://www.moparts.org/Tech/Archive/axle/6.html
Posted By: tbland09

Re: 66 fury 3 rear end - 03/08/13 03:47 AM

awesome thanks guys i will crawl under her this weekend and see what i can find out..next question where would i find gears for her? i havent come up with anything in my searches
Posted By: Cab_Burge

Re: 66 fury 3 rear end - 03/08/13 05:39 AM

Quote:

awesome thanks guys i will crawl under her this weekend and see what i can find out..next question where would i find gears for her? i havent come up with anything in my searches


Dr Diff
Posted By: scratchnfotraction

Re: 66 fury 3 rear end - 03/08/13 02:30 PM

Quote:

Quote:

awesome thanks guys i will crawl under her this weekend and see what i can find out..next question where would i find gears for her? i havent come up with anything in my searches


Dr Diff




X2 Dr Diff has everything you need + some extras
Posted By: Soopernaut

Re: 66 fury 3 rear end - 03/08/13 02:33 PM

Quote:

next question where would i find gears for her? i havent come up with anything in my searches





http://www.google.com/#hl=en&sclient...bvm=bv.43287494,d.d2k&fp=839ff51634e23e13&biw=1102&bih=451
Posted By: dOc …

Re: 66 fury 3 rear end - 03/08/13 02:34 PM

Quote:

awesome thanks guys i will crawl under her this weekend and see what i can find out..next question where would i find gears for her? i havent come up with anything in my searches




Is there a tag on one of the studs ?
© 2024 Moparts Forums