Posted By: JohnH
VENT GLASS GASKET 69 B BODY - 02/25/13 01:28 PM
What do you use to install the vent glass in the channel on a 69 B Body to keep it in place?
Posted By: MOPARMIKE69
Re: VENT GLASS GASKET 69 B BODY - 02/25/13 05:24 PM
It presses into place. It has edges that fit into the channels
Posted By: floridian
Re: VENT GLASS GASKET 69 B BODY - 02/25/13 08:29 PM
Visit your local glass shop and see if they have any extra glass installing tools called "bones".. Just a hard nylon tool with flat edges to help work the rubber edges in..
Posted By: Eagleone1983
Re: VENT GLASS GASKET 69 B BODY - 02/25/13 10:51 PM
He is talking about vent glass not the windsheilds. The vent glass sits in the channel with what is called "glass setting tape". I wanna say the size you need is 1/16" but I can't remember. Just measure your inside channel and subtract the thickness of the glass and divide by two. I have some extra but I don't have enough for you to do both sides.