Posted By: STROKIE
727 Valve Body interchange... - 01/31/13 09:38 PM
Can I interchange a 1967 727 valve Body with a 1971 valve body into my 67 transmission to add part throttle kickdown. 
Thanks.
Thanks.
727 Valve Body interchange...
Posted By: scratchnfotraction
Re: 727 Valve Body interchange... - 01/31/13 10:01 PM
I think the rooster comb on the VB needs changed for the 1 wire NNS.
they have a valve and housing to add PTK or a valve and housing off of a early 904 VB like I have. (grabed the PTK valve at the JY, but never used it yet)
I cant say for sure if it is as ez as swaping in the 71 VB and have it work though.
I will dig that valve and housing out later and post a pic, i read about this in a mopar muscle mag a few yrs back.
they have a valve and housing to add PTK or a valve and housing off of a early 904 VB like I have. (grabed the PTK valve at the JY, but never used it yet)
I cant say for sure if it is as ez as swaping in the 71 VB and have it work though.
I will dig that valve and housing out later and post a pic, i read about this in a mopar muscle mag a few yrs back.
Posted By: John_Kunkel
Re: 727 Valve Body interchange... - 01/31/13 10:23 PM
The '71 VB will work fine in the '67...the single pin NSS will work with the '71 VB too.
Posted By: STROKIE
Re: 727 Valve Body interchange... - 01/31/13 11:32 PM
Many Thanks John, You really make my day...
I'm gonna work on the 727 this week, I just received my 5800 rpm gov. kit and 1-2 Shift Valve Spring from A&A and I will add TRANSGO TF-2 kit in the transmission + the 1971 valve body...
You're the best.
I'm gonna work on the 727 this week, I just received my 5800 rpm gov. kit and 1-2 Shift Valve Spring from A&A and I will add TRANSGO TF-2 kit in the transmission + the 1971 valve body...
You're the best.