Moparts

"A" body over center spring

Posted By: 73Convertriple

"A" body over center spring - 01/03/13 04:26 PM

Spring has a short and a long straight portion before the hook. Long end on pedal or stationary rear location, and open end of hook up or down?
thanks in advance

73 dart sport 340 4speed

Attached picture 7531253-eric.jpg
Posted By: 73Convertriple

Re: "A" body over center spring - 01/03/13 07:47 PM

Anyone out there got a 4 speed "A" body ? I need to reinstall the spring and want to make sure I'm puting it back in the right orientation. Not fun getting them in or out.

Posted By: Pntastar69

Re: "A" body over center spring - 01/03/13 08:39 PM

Hope this helps from Brewers site.

http://www.brewersperformance.com/proddetail.asp?prod=CPA75A
Posted By: JohnRR

Re: "A" body over center spring - 01/03/13 08:40 PM

Should be fairly easy to tell which way it goes , going off my sometimes foggy memory the long end of the springs goes to the peddle , open end down .

Did you try to find a pedal assembly for sale on ebarf ?

tree'd by the guy above me , I see the open end is up , which makes sense ... It was a foggy memory ...
Posted By: 73Convertriple

Re: "A" body over center spring - 01/04/13 03:39 PM

thanks for link to brewers site appears to be long end forward and open hook end up.
Posted By: Pntastar69

Re: "A" body over center spring - 01/04/13 03:54 PM

Quote:

thanks for link to brewers site appears to be long end forward and open hook end up.




Posted By: kentj340

Re: "A" body over center spring - 01/09/13 11:28 PM

On 69 Barracuda 340 4-sp factory installation, long/straight end of spring goes toward firewall. Curved ends are down.

Attached picture 7540243-06-3Clutch&BrakePedals.clutchspring1.jpg
© 2024 Moparts Forums