anyone have a 295/60 on an 8" rim?

a 295 on the 10" rim i have won't fit under my car, but i'm thinking an 8" rim won't balloon the sidewalls out as much, and it may fit.

Why dont you follow the tire manufactures rim recomendations ??

Most manufacturers recommend rim width that is +/- 1" over the tread face. A 295 has a 9.5" tread face, so 8" is slightly under the desireable range. It does create more sidewall bulge and you may have to run pressure under 30# to get full tread contact. Not ideal, but not the end of the world either.

Who makes a 295-60? (15"?) I've been considering 295-50-15 recently (see thread with pics)... but the buldge on an 8" rim is nor desirable... good looks maybe, but 8.5, 9, 9.5 or better yet the 10" rim is best... just a matter of getting the proper backspacing to fit under the wheelwell and then not hitting the springs.... maybe willing to flush the fender lips?

I think I'm going to stay with the 275-60-15 rears on my existing 8" rims for the street/hwy, and get 255-60-15 fronts (OK, OK... I know the BFG T/As are not hi-perf tires... but then I do have other 16x10 rims for competition tires to be used at the weekend autocrosses and hi-speed lapping road course events.)

I have had these 295's on my 8" wide rallyes for over ten years & probably 25000 miles with no issues.

rear view.

mickey thompson et street radials.

P295/55R15 28 X 12.50R15 35 R2 8.0-10.5 9.5 12.0 10.9 27.8 87
--------------------------------------^^^^^

8 is the low end, but wondering if anyone has had any issues...

I'm running the 295/65 mickey on 8 " torq thrust with no problems. ( yes it's an 8 not the more common 8.5) dave

Here's a pic of a 295/65/15 Drag Radial on a 15x8 Weld Prostar. I also have another set of the same size drag radials on a 15x10 Prostar and the section width is wider.

The 15x8 is pictured below



Ron

295/50/15 in the rear on 15x8's
245/60/15 in front on 15x8's

A bit of a bulge in rear but not too bad

Mick I was running 295/50/15 on a 8" rim for the last 5 yrs. The bulge is noticeable. I just switched to 10" and it is better. This pic is with 8" rim. But I am using SS Springs.

Pic with 10" rim with SS Springs.

Quote:

---

Mick I was running 295/50/15 on a 8" rim for the last 5 yrs. The bulge is noticeable. I just switched to 10" and it is better. This pic is with 8" rim. But I am using SS Springs.

---

but is the bulge just noticeable, or doesn't look good?

i just want that extra 1" of tire under the car, and i know i can't do it on 10" rims...