Posted By: MadMatt
NE1 know a source for custom length shifter cables? - 07/07/12 08:54 PM
I'm trying to install a B&M Pro Ratchet shifter that I just bought in my '70 Dart and the supplied 5 ft cable is just too short. What I really need is a 6 foot, but the next size up offered by B&M is an 8 ft which would be way too long. Does anyone know of a source for custom length cables, or if it possible to shorten an 8 ft cable properly?
Posted By: topside
Re: NE1 know a source for custom length shifter cables? - 07/07/12 10:18 PM
The 5-footer for the Cheetah in my '64 looked too short, but it's actually fine. Comes out the front of the shifter, through a hole in the floor, and loops around. TurboAction sells longer cables but I don't know if they work with the B&M. Hole in the floor should be close to the shifter.
Posted By: RodStRace
Re: NE1 know a source for custom length shifter cables? - 07/07/12 10:51 PM
Hint 1
Boating supply store
Hint 2
morse cable
I never understood why all the cables ran FORWARD, into the narrow crowded area instead of back...
Posted By: stumpy
Re: NE1 know a source for custom length shifter cables? - 07/08/12 12:25 AM
Not all cables run out the front. It depends on what shifter you buy.
Posted By: jeffs67
Re: NE1 know a source for custom length shifter cables? - 07/08/12 01:05 AM
B&M makes a 6 foot shifter cable. Check their website. They are the race version with eyelet and threaded end.
Posted By: feets
Re: NE1 know a source for custom length shifter cables? - 07/11/12 04:17 AM
Will the shifter let you run the cable out the back?