Install 383 valley pan with or without 4 facing pieces.

Posted By: BurntOrange

Install 383 valley pan with or without 4 facing pieces. - 04/15/12 02:25 PM

I've always just used the valley pan itself with a little RTV at the corners. Been awhile. I see kits with the 4 - .030 facing pieces. Any advantage either way?

Posted By: lewtot184

Re: Install 383 valley pan with or without 4 facing pieces. - 04/15/12 02:32 PM

the only time i would use the papers is if the manifold has been machined for them.

Posted By: fourgearsavoy

Re: Install 383 valley pan with or without 4 facing pieces. - 04/15/12 02:34 PM

I just use the pan itself with with sealer on the ends and corners

Gus

Attached picture 7165518-savoyburnout.jpg

Posted By: BurntOrange

Re: Install 383 valley pan with or without 4 facing pieces. - 04/15/12 02:43 PM

No spacers . . . got it. THANKS!