Moparts

Best source for 11-3/4" rotors?

Posted By: Molloy

Best source for 11-3/4" rotors? - 12/28/11 03:57 AM

Cat pissed all over mine and they're shot.

Posted By: OzHemi

Re: Best source for 11-3/4" rotors? - 12/28/11 03:59 AM

Rock auto perhaps?

Posted By: Anonymous

Re: Best source for 11-3/4" rotors? - 12/28/11 04:20 AM

Is kitty still breathin'?

Posted By: DirectSubjection

Re: Best source for 11-3/4" rotors? - 12/28/11 04:22 AM

Quote:

Cat pissed all over mine and they're shot.

That's odder than dog ate my rotors

Posted By: 68HemiB

Re: Best source for 11-3/4" rotors? - 12/28/11 04:22 AM

Quote:

Cat pissed all over mine and they're shot.

How so?

Posted By: moparpollack

Re: Best source for 11-3/4" rotors? - 12/28/11 04:23 AM

Quote:

Cat pissed all over mine and they're shot.

That's some cat!

Posted By: 340SHORTY

Re: Best source for 11-3/4" rotors? - 12/28/11 05:09 AM

now Ive heard it all !!!!

Posted By: SCATPK

Re: Best source for 11-3/4" rotors? - 12/28/11 05:18 AM

Throw them in the bead blaster and they will be like new. Just remove the bearings and try to not get to much media on the races and in the grease cavity. Wash out with solvent and paint and call it good! Unless there worn down, cut are warped why replace?

Posted By: Molloy

Re: Best source for 11-3/4" rotors? - 12/28/11 05:42 AM

Quote:

Is kitty still breathin'?

Actually...no. But she died of natural causes.

Posted By: Hugh Jorgan

Re: Best source for 11-3/4" rotors? - 12/28/11 05:45 AM

Posted By: Molloy

Re: Best source for 11-3/4" rotors? - 12/28/11 05:45 AM

Quote:

Quote:

Cat pissed all over mine and they're shot.

How so?

They were off the car at the time. They sat under the car for a year while she apparently pissed on them for a while.

I took them to Oreilly's to have them turned. Couldn't get all (or even most) the pitting out of one of them after knocking off ~10-15 mils. Now the car pulses real bad on stopping. This is on my Charger. It NEEDS to have good brakes.

Posted By: HemiRick

Re: Best source for 11-3/4" rotors? - 12/28/11 05:53 AM

Whats an orignal application?

Posted By: Molloy

Re: Best source for 11-3/4" rotors? - 12/28/11 06:41 AM

76-79 Cordoba rotors.

Posted By: AndyF

Re: Best source for 11-3/4" rotors? - 12/28/11 07:55 PM

I'm not sure if there is still a good source for 11.75 rotors. The very best rotors were the OEM ones which were made in Canada. If you go to a parts store and ask for the premium rotors you might be able to still find some that are made in the USA or in Canada. The Mexico sourced rotors, and the off shore rotors that I've used have all been junk.

Posted By: Moe

Re: Best source for 11-3/4" rotors? - 12/28/11 08:58 PM

How about these? They come w/ the races.

http://www.summitracing.com/parts/BEN-PRT1132/?rtype=10

Better link: http://www.summitracing.com/parts/BEN-PRT1132/

Posted By: Molloy

Re: Best source for 11-3/4" rotors? - 12/28/11 09:58 PM

What do ya'll think of these:

Centric SportStop Drilled and Slotted Rotor

http://www.rockauto.com/catalog/moreinfo.php?pk=1612764

Posted By: Anonymous

Re: Best source for 11-3/4" rotors? - 12/28/11 11:25 PM

Quote:

Quote:

Is kitty still breathin'?

Actually...no. But she died of natural causes.

Carbon monoxide poisoning = "natural causes"