Jim, my rear top holes are off set from the axle center and angle forward and I didn't plot this measurement when I had it on the rack.

However, I guesstimated the holes and came up close to what you had.




Vic, Do I know Dave?

I'ld really like to thank everyone for their help.

And yes Jamie, My head is gonna

Bill, you need some more so you can concentrate, that will also help aleviate any cranial implosions. good luck buddy.

I think at this point the only thing keeping my head in one piece is my anal/cranial inversion.

Dave owns R&R auto body on Brookpark and Smith about 100 yards west of w.150/smith on the north side. They race a door slammer and go low 6's in the 1/4

Then Yes, I know Dave

He was the one I worked with in getting Taylor's helmet painted and Kaitlin's body fixed from when she hit the wall.

I used this online calculator when setting up my buddies 4 bar. Measurements are taken from the ground.

http://inductionmotorsports.com/im/

Just go to the calculators tab, then Instant Center Calculator.

Charlie.