|
|
|
Re: Holley Dominator Screen Kit???
[Re: BradH]
#965030
04/05/11 10:42 AM
04/05/11 10:42 AM
|
Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
MRMOPAR622
top fuel
|
top fuel
Joined: Sep 2003
Posts: 2,008
Sweet Home Alabama
|
Your local stereo shop has these in all sizes. Stereo speaker covers,the local shop give me mine. Drill a hole in the middle bolt them,notice mine is setting on the edge of the injector(carb.)not where the scoop tray sits.That way it does not affect the scoop height.
"To Be The Man'You Have Got To Beat The Man"
"T/D and Pro-Bracket Racer"
|
|
|
Re: Holley Dominator Screen Kit???
[Re: dragram440]
#965032
04/05/11 04:16 PM
04/05/11 04:16 PM
|
Joined: Apr 2003
Posts: 1,635
anywhere@ anytime
actionange
top fuel
|
top fuel
Joined: Apr 2003
Posts: 1,635
anywhere@ anytime
|
Quote:
Quote:
Here's what I did. Got a Quick fuel air bell 11 inch diameter, added a K&N Extreme top 9 inch diameter. Better filtering than just screen.Fit under a 3 inch tall hood scoop. Both available at Jegs.
This is a really good idea. I need a bigger scoop or a 4500 intake without the 2" adaptor. Does the 9" top seem to flow enough air through it? Do the carb vent tubes clear the bottom or did you have to cut them off a bit? Looks good  Im going this route for sure!
The carb vents fit in between the filter ribs in the Xtreme top.
I've only used the 9 in top. Bought it 1st, it worked and I saw no need to spend additional $$$ on 11 inch top... 
|
|
|
Re: Holley Dominator Screen Kit???
[Re: actionange]
#965033
04/14/13 11:28 AM
04/14/13 11:28 AM
|
Joined: May 2006
Posts: 1,260
New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
Bringing back a really old thread here, but I need a filter for the 950 HP and have an 11" K&N Extreme lid laying around, a Quick Fuel air bell is pretty cheap...Anyone else tried this? I've also read the Extreme tops result in a HP loss when used with a filter so I was curious. FYI: I have a functional forward facing hood scoop. Thanks
2001 Dodge Dakota
408 All Motor
11.27 @ 117.83 mph
2017 NM Mopar Challenge Series Champion.
|
|
|
Re: Holley Dominator Screen Kit???
[Re: Adobedude]
#965034
04/14/13 12:01 PM
04/14/13 12:01 PM
|
Joined: Aug 2003
Posts: 44,200
Bend,OR USA
Cab_Burge
I Win
|
I Win
Joined: Aug 2003
Posts: 44,200
Bend,OR USA
|
Quote:
Bringing back a really old thread here, but I need a filter for the 950 HP and have an 11" K&N Extreme lid laying around, a Quick Fuel air bell is pretty cheap...Anyone else tried this?
I've also read the Extreme tops result in a HP loss when used with a filter so I was curious.
FYI: I have a functional forward facing hood scoop.
Thanks
The extreme lids will lose power(8 HP at peak, twice on two different motors, two different engine dynos and carbs  ) on a engine dyno test but they will make the car with close hood scoops run faster(.030 Et ,3 MPH ) at the track when tested against a steel lid on the air cleaner. That test was done on a Duster with a 440 motor using Dominator and a six pak style scoop IHTHs
Mr.Cab Racing and winning with Mopars since 1964. (Old F--t, Huh)
|
|
|
Re: Holley Dominator Screen Kit???
[Re: Cab_Burge]
#965035
04/14/13 12:05 PM
04/14/13 12:05 PM
|
Joined: May 2006
Posts: 1,260
New Mexico
Adobedude
pro stock
|
pro stock
Joined: May 2006
Posts: 1,260
New Mexico
|
The motor is offset to the passenger side in a Dakota so I either need to make an off set base or get a uni filter, it will still fit under the hood scoop even though it's off center.
That's why I was wondering about the QF bell housing and extreme lid
2001 Dodge Dakota
408 All Motor
11.27 @ 117.83 mph
2017 NM Mopar Challenge Series Champion.
|
|
|
Re: Holley Dominator Screen Kit???
[Re: actionange]
#965036
04/14/13 12:44 PM
04/14/13 12:44 PM
|
Joined: Dec 2007
Posts: 12,595
Great Neck,LI,new york
hemi-itis
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 12,595
Great Neck,LI,new york
|
Quote:
Quote:
Quote:
Here's what I did. Got a Quick fuel air bell 11 inch diameter, added a K&N Extreme top 9 inch diameter. Better filtering than just screen.Fit under a 3 inch tall hood scoop. Both available at Jegs.
This is a really good idea. I need a bigger scoop or a 4500 intake without the 2" adaptor. Does the 9" top seem to flow enough air through it? Do the carb vent tubes clear the bottom or did you have to cut them off a bit? Looks good Im going this route for sure!
The carb vents fit in between the filter ribs in the Xtreme top.
I've only used the 9 in top. Bought it 1st, it worked and I saw no need to spend additional $$$ on 11 inch top...
Nice job on that Ange,wonder if it would be better if you sealed it to the scoop.K&N does not make an extream top small enough for my set up,I was thinking about a screen set up for race days.The only thing I came up with would be a pair of strainers 
HEMI-ITIS has no cure.
My condition is fully BLOWN!!
|
|
|
|
|
|
|
