|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: DJVCuda]
#927921
02/13/11 09:12 PM
02/13/11 09:12 PM
|
Joined: Jan 2010
Posts: 236
upstate, New York
jvcuda
enthusiast
|
enthusiast
Joined: Jan 2010
Posts: 236
upstate, New York
|
Quote:
dynamic also does tranny's - ( pro-formance transmissions)
2X
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: hemi471]
#927923
02/13/11 11:08 PM
02/13/11 11:08 PM
|
Joined: Jan 2010
Posts: 311
Kingsville, Md
grncpe
enthusiast
|
enthusiast
Joined: Jan 2010
Posts: 311
Kingsville, Md
|
Quote:
Dynamic are great to deal with or ATI in Baltimore. I have used both!!!
dynamic is ok .You have to make sure to tell them what you are going to make power wise and over build it from there.Spag,Alum.Drum,Good Valvebody.
Ati builds a great converter,& great powerglides....However they cant build a torqueflite to save their life!
I say this as I had a few from them.they say 750 horse,no problem!
I make about 625 with a 493,
9 passes on the first 1 high gear went away.sent it back waited 2 months for them to rebuild it.Got it back and it was another trans.Put it in with another Brand New 8 in. Treemaster conv.
11 passes and the sprag let go.stock junk drum....you know the rest
BOOM.I was on crutches for 6 months....
So I would deal with Dynamic after that...but I will say Ati's converters are good! I have a new 1 in my Turbo 400 behind my 493...
There is another guy here in Maryland that is good with 727's
Ed Knolls can dig up the # if you like.
Also John Richmond is good also...
Just thought I would chime in to let you know on the ATI thing
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: Sick 660r]
#927925
02/13/11 11:14 PM
02/13/11 11:14 PM
|
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
fishy340
master
|
master
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
|
i have an ati 727 w no issue just freshened other then the band everything else was spot on,,,and i banged that thing around..ati coverter on the other hand looked like a nut was flying around in it..all the fins were dogged.
Last edited by AWBDART; 02/13/11 11:15 PM.
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: fullmetaljacket]
#927930
02/14/11 09:21 PM
02/14/11 09:21 PM
|
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
fishy340
master
|
master
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
|
Quote:
If you can get a ride up to Zoo York City, then look no further than Brooklyn's own Turbo Torque. He builds the best razor sharp 27's and 04's out there with tricks and gadgets that will up stage many major tranny heads.
Very honest, knowledgeable and fast.
u mean curtis! yea he build 1badfish pablo's stuff,look at pablo he needs bars off a foot brake
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: fastcoronet]
#927935
02/19/11 03:25 PM
02/19/11 03:25 PM
|
Joined: Apr 2007
Posts: 193
MD
ADakotaRTGuy
OP
member
|
OP
member
Joined: Apr 2007
Posts: 193
MD
|
Quote:
go to Ron Campbell on Race road in essex maryland.
this guy is the best and will give you a hard hitting tranny. Lupo ripe me off and took my money.
What happened with what you got from them?
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: ADakotaRTGuy]
#927938
02/20/11 04:37 PM
02/20/11 04:37 PM
|
Joined: Feb 2005
Posts: 2,709
NJ central
Scamp408
master
|
master
Joined: Feb 2005
Posts: 2,709
NJ central
|
Watch on the shipping
(just keep it clean)
Last edited by scamp408; 02/21/11 01:45 PM.
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: B G Racing]
#927941
02/20/11 08:27 PM
02/20/11 08:27 PM
|
Joined: Sep 2007
Posts: 468
Dirty Dena, Maryland
dodge turbo
mopar
|
mopar
Joined: Sep 2007
Posts: 468
Dirty Dena, Maryland
|
Dave Wilson(owner) @ Southern automatic in Eldersburg,Md built mine in my turbo truck goin on 3years now...has a A@A manual valve body in it. He also built the tranny in my brothers 700hp cummins over 2years ago with no problems, it does have all good billet stuff and a good vavle body He also stands by all his race stuff too if it ever brakes. He did free labor on my brothers tranny after it broke a output shaft because of a manufactures flaw
78 Adventurer 150small block turbo'd 360w/Borg S475....smoke'em
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: Scamp408]
#927942
02/21/11 12:33 PM
02/21/11 12:33 PM
|
Joined: Jan 2003
Posts: 2,771
Cedar Lake IN
CRT
master
|
master
Joined: Jan 2003
Posts: 2,771
Cedar Lake IN
|
Quote:
Watch Cope on the shipping he overcharges alot
Paul, I charged you $14.68 for shipping. How much did I overcharge you? Plese let me know what you call "alot"
John Cope
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: CRT]
#927943
02/21/11 01:43 PM
02/21/11 01:43 PM
|
Joined: Feb 2005
Posts: 2,709
NJ central
Scamp408
master
|
master
Joined: Feb 2005
Posts: 2,709
NJ central
|
Quote:
Quote:
Watch Cope on the shipping he overcharges alot
Paul, I charged you $14.68 for shipping. How much did I overcharge you? Plese let me know what you call "alot"
John Cope
Well $14.68 for a part that would of fit in a 2.99 bubble pak seems to be alot even $7.00 would have been ok. Hey it is what it is 
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: Scamp408]
#927944
02/21/11 02:36 PM
02/21/11 02:36 PM
|
Joined: Mar 2003
Posts: 624
Baltimore,MD
lowbudget
mopar addict
|
mopar addict
Joined: Mar 2003
Posts: 624
Baltimore,MD
|
Well $14.68 for a part that would of fit in a 2.99 bubble pak seems to be alot even $7.00 would have been ok. Hey it is what it is
So let me get this straight, your calling the guy out on the internet over $7.00 or something in shipping...after all the money we tie up in these racecars, $7 freakin dollars?!!!!!! Priceless...no wonder Mopar guys are so far behind
Cope does excellent work it seems and tried to go out of his way to help me in a bind before as he has done many others...have a little respect 
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: lowbudget]
#927945
02/21/11 03:07 PM
02/21/11 03:07 PM
|
Joined: Jan 2003
Posts: 2,771
Cedar Lake IN
CRT
master
|
master
Joined: Jan 2003
Posts: 2,771
Cedar Lake IN
|
lowbudget very well said. Yes I am sure that part would fit in a bubble pack, But even if I was to ship a part that was in a 1"x1"x1" box or a bubble pack , that weighs 1 pound, UPS still has a minimum charge, a fuel surcharge, and an additional charge for shipping to a residential address, which you used. I just want to be clear, that I do not overcharge for shipping, or like in your last post, you said you got "raped" I do my best to ship parts at reasonable prices. The only time you need to watch out for Cope, is if you are lined up next to me on the track.
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: CRT]
#927946
02/21/11 10:48 PM
02/21/11 10:48 PM
|
Joined: Feb 2003
Posts: 6,849
fullmetaljacket
master
|
master
Joined: Feb 2003
Posts: 6,849
|
|
|
|
|
|
