Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: DJVCuda]
#927921
02/13/11 09:12 PM
02/13/11 09:12 PM
|
Joined: Jan 2010
Posts: 236 upstate, New York
jvcuda
enthusiast
|
enthusiast
Joined: Jan 2010
Posts: 236
upstate, New York
|
Quote:
dynamic also does tranny's - ( pro-formance transmissions)
2X
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: hemi471]
#927923
02/13/11 11:08 PM
02/13/11 11:08 PM
|
Joined: Jan 2010
Posts: 311 Kingsville, Md
grncpe
enthusiast
|
enthusiast
Joined: Jan 2010
Posts: 311
Kingsville, Md
|
Quote:
Dynamic are great to deal with or ATI in Baltimore. I have used both!!!
dynamic is ok .You have to make sure to tell them what you are going to make power wise and over build it from there.Spag,Alum.Drum,Good Valvebody. Ati builds a great converter,& great powerglides....However they cant build a torqueflite to save their life! I say this as I had a few from them.they say 750 horse,no problem! I make about 625 with a 493, 9 passes on the first 1 high gear went away.sent it back waited 2 months for them to rebuild it.Got it back and it was another trans.Put it in with another Brand New 8 in. Treemaster conv. 11 passes and the sprag let go.stock junk drum....you know the rest BOOM.I was on crutches for 6 months.... So I would deal with Dynamic after that...but I will say Ati's converters are good! I have a new 1 in my Turbo 400 behind my 493...
There is another guy here in Maryland that is good with 727's Ed Knolls can dig up the # if you like. Also John Richmond is good also... Just thought I would chime in to let you know on the ATI thing
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: Sick 660r]
#927925
02/13/11 11:14 PM
02/13/11 11:14 PM
|
Joined: Jun 2010
Posts: 3,112 LONG ISLAND
fishy340
master
|
master
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
|
i have an ati 727 w no issue just freshened other then the band everything else was spot on,,,and i banged that thing around..ati coverter on the other hand looked like a nut was flying around in it..all the fins were dogged.
Last edited by AWBDART; 02/13/11 11:15 PM.
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: fullmetaljacket]
#927930
02/14/11 09:21 PM
02/14/11 09:21 PM
|
Joined: Jun 2010
Posts: 3,112 LONG ISLAND
fishy340
master
|
master
Joined: Jun 2010
Posts: 3,112
LONG ISLAND
|
Quote:
If you can get a ride up to Zoo York City, then look no further than Brooklyn's own Turbo Torque. He builds the best razor sharp 27's and 04's out there with tricks and gadgets that will up stage many major tranny heads. Very honest, knowledgeable and fast.
u mean curtis! yea he build 1badfish pablo's stuff,look at pablo he needs bars off a foot brake
|
|
|
Re: Reputable 727 builder in the Northeast - MD/NJ/DE
[Re: fastcoronet]
#927935
02/19/11 03:25 PM
02/19/11 03:25 PM
|
Joined: Apr 2007
Posts: 193 MD
ADakotaRTGuy
OP
member
|
OP
member
Joined: Apr 2007
Posts: 193
MD
|
Quote:
go to Ron Campbell on Race road in essex maryland. this guy is the best and will give you a hard hitting tranny. Lupo ripe me off and took my money.
What happened with what you got from them?
|
|
|
|
|