We're getting ready to make another run of torque plates for RB/B blocks, Gen 2 Hemi's(426), Gen 3 Hemi's (5.7-6.1) Small Block (318-340-360) and R blocks with the additional inner and outer studs.

Over the years we've found that many machine shops simply don't have much in the way of torque plates for Mopar engines. we've loaned ours out to several of the local shops here over the years and yet because they figure they can borrow ours, they just don't care to spend the money to buy their own. (go figure). we've recently adopted the policy of NOT loaning them out any more since it always seems like a fight to get them back in a timely manner.
in any event, for you guys that deal with shops that don't have torque plates for your engines, nows your chance to purchase a quality piece at what we feel is not only an affordable price, but one that will truely mimic the bore distortion we typically see with the most common heads in use today.
our production run will have set bore sizes but we can adjust that to your individual needs if desired.
we can also provide hardware for the plates if desired.

before we list pricing here i just wanted to see if there was any interest from any of the members here. almost all of the plates we plan to make right now are spoken for, but we will add to those numbers accordingly to accomodate any additional orders.
the material used will vary depending on the application but will be either 6061-t6 or 7075-t7
let me know if you guys have any additional questions and i'll do my best to answer them.


I just wanted to let you guys know that these are being shipped out daily now. if yours hasn't arrived yet you should have it very soon.
here's a picture of one of the anodized plates. if you didn't order the anodizing, yours will look slightly different.

Im curious on a small and big block plate. PM me the prices Dan...

Kasey

i'd be interested in the b/rb plate, and possibly gen III hemi. pm me if you could. thanks.

Im interested in a gen 2 hemi plate. pm me with a price please.

I may be interested in a smallblock and bigblock plate, shoot me a pm.

on the big block plates how many bore sizes can you use with one plate? my current stuff is 4.375, but my next one will be 4.5-4.55?

I'm interested in a plate for a big block, but with the bolt holes threaded for use on cylinder heads. If this can be done Dan, please e-mail me @ classracer@aol.com

Thanks;
Jim

I'm in need for a BB and SB plate. I could arrange for shipping to Germany, could you PM me with pricing information?
Thanks,
Frank

for those that have already placed their orders, thank you

except for a couple of tire kickers (normal i suppose) the response to this offer has been very good. i just wanted to say thanks once again.
we will start the production runs approximately 1 week from today.

we are also offering Anodizing if anyone wants it.
we;ve decided to offer it in clear and black only. the cost for that is 37.50, which i believe is very reasonable. basically we aren't making any money on that, but it really is a nice touch so if you've already ordered and decide you want it done, please contact me before production begins.

thanks again
Dan
561-758-6604

just wanted to everyone know, we have 80 pieces on order and should be here by this friday or possibly monday. as soon as they arrive we'll start running them on an evening shift to get them done as quickly as possible for you.
if anyone else decides they could use one, please let me know as soon as possible.
thank you for your orders. i'll post pictures as soon as we've made the first run on the small block plates.

any updates?

please see the first post for the updated info.

wow! you got me wishing i ordered anodized!

beautiful Dan

thank you. oh, and yes, the anodizing is a nice feature.

You can disregard my PM Dan, I was typing it as you update with the last post and your previous update answered my question.